|
April 2006 - Georgia Power Storm Center
Georgia Power Storm Center is a command and control area that is used when there are storms to monitor power outages. Here they mobilize technical staff to areas with power outages caused by storms.
TIP installed to large Video Projection Screens and side by side Projectors. Each image can be divided into 4 separate images for a total of 8 images for monitoring. We also installed a projector lift and screen in the conference room with 2 show positions.
Jan. 2005 to Aug. 2005 - The Center for Disease Control's Global Communication Headquarters, Atlanta, GA
The Center for Disease Control's Global Communication Headquarters consisted of
state of the art HDSDI capabilities. We installed 4 30 seat divisible rooms that
can be expanded to 60 seats with the following equipment; Crestron Pro2's,
Crestron UPX's, Barco Icon600's, Evertz AES coax to two wire converters, with
podiums and source equipment.
We installed 1 60 seat video conferencing room consisting of rear screen
projection (Barco Icon600), Crestron Pro2, Crestron UPX's, 4 Sony HD capatible
cameras, Lecturn with touchscreen and UPX panel, HDVHS player, Quadview monitor,
1 Panasonic 42" plasma, Extron Switchers and scan converters, Analog Way HDSDI
to RGBHV converters, Tandberg Video conferencing unit, and XAP400 and 800
mixers/audio conferencing units.
We installed equipment into a 400 seat Auditorium with 40 70v ceiling speakers 3
HDSDI pan tilt Panasonic Cameras with Telemetric's controllers, 1 lectern with
Touchscreen's, 4 Barco Icon600 projectors (Two were dual stack in Drop down
Enclosure for Main Screen), 16 Analog way HDSDI to RGBHV scan converters, 2
Extron 32 X32 Switchers, 2 Crestron Pro2's, 3 Crestron UPX's, 1 Yamaha DME 64
with 4 Input DA's and 4 Output DA's, Evertz Fiber optic frames for AES audio
Conversion, and one Yamaha O2R with AES input cards.
We installed equipment in a 300 seat auditorium with surround efx. The system
equipment was very similar to the 400 seat room with the exception being
quantity.
We also installed equipment in the CDC's main press conference room. We moved
their existing equipment from the old location to the new building. We replaced
all of the audio side with a Yamaha DME64 engine and Yamaha D/A converters for
inputs and outputs. We added the Yamaha O2R console. We also hung 2 62" plasma's
(one ceiling and one Wall) in addition there was a custom lectern with a UPX
touchpanel. The Control was Crestron Pro2 and a UPX processor. This room was a
tight time frame for removal and reinstall. We completed the process in less
than one week.
All of the above systems were linked to the main control room with multiple runs
of HDSDI, Fiber optic's, AES audio, Reference signal, Time code signals, and
Intercom. The build was three floors with rooms located in two of the three
floors. We also ran 240 HDSDI from the "OCC" to the basement for Video
broadcast along with 150 AES, 75 REF, 60 Time Code, 75 CAT6E, and some
miscellaneous intercom and control cabling.
Over all from start to finish was approx. 8 months of constant onsite work with
2 months of shop build.
2005 - NASA, Cape Canaveral, FL
NASA Critical Missions Video Conferencing Room is used for the Space Shuttle missions to videoconference Cape Canaveral FL, Huntsville AL and Houston TX to discuss
and make critical mission decisions quickly. Flawless operation since complete April 30, 2005.
2004 - Atlanta Fire and Police 911 Emergency Center,
Atlanta, GA
Total monitoring system upgrade to allow 911 Operators to see emergency call data (real time) as they dispatch Police and Fire.
TIP removed all existing monitors and mounts throughout the 911 Command Center and replaced with Ceiling Mounted 30" Flat
Panel Monitors without disrupting daily activities of the Center. A 42" Flat Panel Monitor with associated program switching was
was added the Conference Room to monitor critical 911 Emergency Calls. Project was completed Nov. 2004.
|
Corporate
Boardrooms & Training Facilities 
